- Introduction
- Features
- Specifications
HK-8110 Online Suspended Solids Analyzer adopts scattered light method. The light emitted by the detector light source, measuring light, will reflect when it meets the surface of suspended solids in the measuring water. The optical detector, set at an angle of 130° with the light source, can detect the reflected light (scattered light). Turbidity is measured according to the intensity of the detected scattered light and the concentration of suspended solids in water.
◆Automatic wiper cleaning system.
◆Anti-scratch tempered glass.
◆ Fast response of measurement.
◆Strong anti-interference ability.
|
Measurement Range |
0-50000mg/L |
|
|
Display |
Chinese/English, 480×272 lattice LCD |
|
|
Resolution |
10mg/L |
|
|
Repeatability |
±2%FS |
|
|
Signal Output |
(4～20)mA /RS485; (4～20)mA/HART; Optional |
|
|
Relay Output |
2 channels |
|
|
Data Storage |
≥100,000 |
|
|
Cleaning Cycle Interval |
Adjustable, Min.: 10 min; Max.: 90 min. Clean automatically after power on. |
|
|
Response Time |
T90≤20s |
|
|
Sample Temperature |
(0～50)℃ |
|
|
Power Supply |
AC (100～240)V, (50～60)Hz |
|
|
Safety Requirement |
Leakage Current |
≤3.5mA |
|
Ground Resistance |
≤0.5Ω |
|
|
Insulation Resistance |
The insulation resistance of the power phase and the neutral wire of the electronic unit to the ground: ≥ 40MΩ |
|
|
Dielectric Strength |
Between the power phase, neutral wire and ground, and between the power input terminal and the metal parts that may be touched, it should be able to withstand a test voltage of AC 1500V, 50Hz for 1min, there should be no breakdown and arcing. |
|
|
Transmitter Overall Dimension |
146mm×146mm |
|
|
Sensor Overall Dimension |
302mm×155mm |
|
|
Cable Length |
10m |
|
|
Sensor Ingress Protection |
>IP68, the maximum depth of embedded installation is 2m. |
|
|
Sensor Pressure-Resistant |
0.5MPa |
|
|
Key |
8 keys |
|
|
Transmitter Mounting Mode |
Panel mounting, Wall mounting, Pipe mounting |
|
|
Power Consumption |
≤12W |
|
|
Weight |
6kg |
|